On the swelling potential of compacted high plasticity clays     

Valry Ferber  Jean-Claude Auriol  Yu-Jun Cui  Jean-Pierre Magnan 《Engineering Geology》2009,104(3-4):200-210

We conducted a study of the spatial distributions of seismicity and earthquake hazard parameters for Turkey and the adjacent areas, applying the maximum likelihood method. The procedure allows for the use of either historical or instrumental data, or even a combination of the two. By using this method, we can estimate the earthquake hazard parameters, which include the maximum regional magnitude Mˆ_max, the activity rate of seismic events and the well-known bˆ value, which is the slope of the frequency-magnitude Gutenberg-Richter relationship. These three parameters are determined simultaneously using an iterative scheme. The uncertainty in the determination of the magnitudes was also taken into consideration. The return periods (RP) of earthquakes with a magnitude M ≥ m are also evaluated. The whole examined area is divided into 24 seismic regions based on their seismotectonic regime. The homogeneity of the magnitudes is an essential factor in such studies. In order to achieve homogeneity of the magnitudes, formulas that convert any magnitude to an M_S-surface scale are developed. New completeness cutoffs and their corresponding time intervals are also assessed for each of the 24 seismic regions. Each of the obtained parameters is distributed into its respective seismic region, allowing for an analysis of the localized seismicity parameters and a representation of their regional variation on a map. The earthquake hazard level is also calculated as a function of the form Θ = (Mˆ_max,RP_6.0), and a relative hazard scale (defined as the index K) is defined for each seismic region. The investigated regions are then classified into five groups using these parameters. This classification is useful for theoretical and practical reasons and provides a picture of quantitative seismicity. An attempt is then made to relate these values to the local tectonics.  相似文献   

东海地区高压-超高压变质带中变质橄榄岩及其原岩和成因类型的判别——以PP1孔和PP3孔为例     

王希斌  杨经绥  李天福  陈松永  任玉峰 《地质学报》2009,83(7):946-963

本文在总结全球地幔橄榄岩岩石学和地球化学特征的基础上,首次提出了一个用于判别HPUHP变质带中变质橄榄岩原岩及其成因类型的判别图解。该图主要由镁铁总量MgO+（%）和一个参数m+f/si比值构成。另用Al2O3和CaO分别与MgO+（%）制成两个辅助图解,以示方辉橄榄岩和二辉橄榄岩之间在Al2O3和CaO含量上的分界。通过原岩判别结果和研究表明,PP3孔和PP1孔两者在变质组合、原岩成因类型、地球化学和变质条件方面存在一系列的重大差异。分别代表来自两种极端的地球化学类型和两种不同大地构造环境的UHP变质体。PP3钻孔以Ol+Gt+Cpx+Opx+Sp为变质矿物共生组合的含石榴石纯橄岩,其原岩系来自地幔残余成因的方辉橄榄岩遭受UHP变质作用的产物,它以成分高度均一,富Mg（Mg’=92）,极端亏损不相容元素REE（∑REE<1×10-6可称为超亏损型）为特征。在变质相中仍保留原岩的残余矿物铬尖晶石（Sp）,其成分显示蛇绿岩地幔橄榄岩的成分趋势。并出现以Gt和Sp共存相为特征的变质相。据实验结果（klemme,2004）表明该共存相的稳定域的PT条件CrSp可达7Gpa,T1400℃,即形成于200km的地幔深度。综合研究显示该孔变质橄榄岩原岩（方辉橄榄岩）具有大洋岩石圈地幔残余成因的某些印记,而不是同深度原生地幔岩相转变的产物。PP1孔变质橄榄岩是由无水矿物相（Ol+Opx+Cpx+Gt）+含水矿物相（Phl±Chu）组成的石榴石橄榄岩杂岩,其原岩来自两种不同成因的超镁铁岩系列：一为具地幔成因的方辉橄榄岩二辉橄榄岩系列（可能相当于地幔楔中的Al型橄榄岩）,另一部分（少数）来自具岩浆成因的超镁铁岩系列（纯橄岩—异剥橄榄岩—辉石岩组合,可能相当于A2型橄榄岩）。该套变质橄榄岩,以成分高度不均一,极端富集REE（∑REE平均>20×10-6可称为超富集型）和大离子亲石元素（K、Ba、Rb）为特征。这种异常现象并不反映其原岩原有的地球化学特征,它可能是由于在俯冲过程中受到陆壳物质的污染,或壳幔相互作用所致。据该孔变质相中缺乏Sp相,而以Gt为标志的变质相的事实,推断其形成的压力条件应>7Gpa, 即形成的深度应大于200km。上述研究表明在苏鲁UHP变质带中,不仅有来自大陆地幔楔中的地幔残余的UHP变质体,而且首次提出有可能来自大陆俯冲前锋具大洋岩石圈地幔性质的（蛇绿岩型地幔残片）变质体存在,这对揭示该区UHP变质带的形成和演化过程提供了新的信息。  相似文献   

东海地区高压-超高压变质带中变质橄榄岩及其原岩和成因类型的判别——以PP1孔和PP3孔为例   总被引：3，自引：0，他引：3  

王希斌  杨经绥  李天福  陈松永  任玉峰 《地质学报》2009,83(7)

本文在总结全球地幔橄榄岩岩石学和地球化学特征的基础上,首次提出了一个用于判别HP-UHP变质带中变质橄榄岩原岩及其成因类型的判别图解.该图主要由镁铁总量MgO+(%)和一个参数m+f/si比值构成.另用Al2O3和CaO分别与MgO+(%)制成两个辅助图解,以示方辉橄榄岩和二辉橄榄岩之间在Al2O3和CaO含量上的分界.通过原岩判别结果和研究表明,PP3孔和PP1孔两者在变质组合、原岩成因类型、地球化学和变质条件方面存在一系列的重大差异.分别代表来自两种极端的地球化学类型和两种不同大地构造环境的UHP变质体.PP3钻孔以Ol+Gt+Cpx+Opx+Sp为变质矿物共生组合的含石榴石纯橄岩,其原岩系来自地幔残余成因的方辉橄榄岩遭受UHP变质作用的产物,它以成分高度均一,富Mg(Mg'=92),极端亏损不相容元素REE(∑REE<1×10-6可称为超亏损型)为特征.在变质相中仍保留原岩的残余矿物铬尖晶石(Sp),其成分显示蛇绿岩地幔橄榄岩的成分趋势.并出现以Gt和Sp共存相为特征的变质相.据实验结果(klemme,2004)表明该共存相的稳定域的P-T条件Cr-Sp可达7Gpa,T1400℃,即形成于200km的地幔深度.综合研究显示该孔变质橄榄岩原岩(方辉橄榄岩)具有大洋岩石圈地幔残余成因的某些印记,而不是同深度原生地幔岩相转变的产物.PP1孔变质橄榄岩是由无水矿物相(Ol+Opx+Cpx+Gt)+含水矿物相(Phl±Chu)组成的石榴石橄榄岩杂岩,其原岩来自两种不同成因的超镁铁岩系列:一为具地幔成因的方辉橄榄岩-二辉橄榄岩系列(可能相当于地幔楔中的Al型橄榄岩),另一部分(少数)来自具岩浆成因的超镁铁岩系列(纯橄岩-异剥橄榄岩-辉石岩组合,可能相当于A2型橄榄岩).该套变质橄榄岩,以成分高度不均一,极端富集REE(∑REE平均>20×10-6可称为超富集型)和大离子亲石元素(K、Ba、Rb)为特征.这种异常现象并不反映其原岩原有的地球化学特征,它可能是由于在俯冲过程中受到陆壳物质的污染,或壳-幔相互作用所致.据该孔变质相中缺乏Sp相,而以Gt为标志的变质相的事实,推断其形成的压力条件应>7Gpa, 即形成的深度应大于200km.上述研究表明在苏鲁UHP变质带中,不仅有来自大陆地幔楔中的地幔残余的UHP变质体,而且首次提出有可能来自大陆俯冲前锋具大洋岩石圈地幔性质的(蛇绿岩型地幔残片)变质体存在,这对揭示该区UHP变质带的形成和演化过程提供了新的信息.  相似文献   

河北承德大庙黑山钒钛磁体矿床地质特征与成因探讨   总被引：8，自引：1，他引：7  

孙静  杜维河  王德忠  李健  徐国新  韩玉丑 《地质学报》2009,83(9):1344-1364

河北承德大庙黑山铁矿床位于大庙斜长岩体南部边缘,红石砬—大庙深断裂附近北侧。矿区内主要岩类为斜长岩,根据蚀变作用可分为钠黝帘石化斜长岩、绿泥石化斜长岩及混染斜长岩等,前者广泛分布于矿区内,后二者常构成铁矿的直接围岩。黑山铁矿苏长岩体与铁矿体有成因联系,主要受近东西向压扭性断层和龙潭沟—岔沟压扭性断裂带构造控制,分布于黑山斜长岩体内。部分苏长岩体中有分异式浸染矿体,在苏长岩接触带及其围岩中的矿体则为贯入式矿体。苏长岩体根据其特征和共生组合,可划分为两个岩石系列：①苏长岩岩石系列（苏长岩类型岩体、含橄苏长岩苏长岩类型岩体）;②二长岩苏长岩岩石系列（二长岩苏长岩类型岩体、二长岩橄榄苏长岩类型岩体）。矿石结构主要为自形—半自形晶粒状结构、格状熔离结构、海绵陨铁结构。矿石构造有致密块状构造、浸染状构造。矿石金属矿物主要为含钒钛磁铁矿（含量3%～60%）、钛铁矿（含量2%～19%）、含钒磁铁矿（含量7%～27%）,次有少量含钴黄铁矿、黄铜矿。脉石矿物主要为绿泥石（含量7%～33%）,次为斜长石（0%～45%）,及其它少量矿物。黑山的矿源苏长岩和中国及世界同类岩石有显著不同,Si、Al、Fe、Ti、P、Na、K含量高,Ca、Mg含量低,这类岩体为形成铁磷矿床提供了物质来源。本区斜长岩、矿源苏长岩铁矿床和铁磷矿床的氧同位素组成δ18O限于一个很窄的变化范围,反映了它们的物质来源和成因类型的同一性。黑山苏长岩、伟晶苏长岩δ34S 为+1.3‰～+2.1‰,反映苏长岩浆来源于上地幔。黑山铁磷矿体经铁钛氧化物矿物对形成温度计计算得出生成温度为615~975℃,显示该岩浆矿床高温成矿特点。研究认为黑山铁矿主要①、②号铁矿体为岩浆贯入成矿。  相似文献   

The contribution of agricultural and urban activities to inorganic carbon fluxes within temperate watersheds   总被引：8，自引：0，他引：8  

Rebecca T. Barnes  Peter A. Raymond 《Chemical Geology》2009,266(3-4):327-336

The lateral transport of bicarbonate as dissolved inorganic carbon (DIC) to the oceans is an integral component of the global carbon budget and can represent the sequestration of CO₂ from the atmosphere. Recently studies have implicated land use change, in particular agricultural development, as an accelerator of bicarbonate export. However, due to the co-variation of land use, bedrock and surficial geologies, and the relationship between bicarbonate export and climate, the impact of anthropogenic activities on DIC export remains an important research question. In order to examine the land use controls on DIC export from small temperate watersheds we sampled 19 streams draining catchments of varying land uses with similar bedrock and surficial geologies. In addition to an agricultural effect, there was a strong correlation between the percent of watershed in urban development and DIC concentrations and DIC yields. Urban watersheds exported 7.8 times more DIC than their nearby forested counterparts and 2.0 times more DIC than nearby agricultural catchments. Isotopic data suggest that excess DIC export from altered systems results from increased chemical weathering, enhanced CO₂ production within urban green spaces, and as a result of organic matter loading from septic systems and leaky sewer lines. Furthermore, we found that nitrogen additions (e.g. fertilizers and manure) are aiding in the dissolution of lime, increasing the total export of DIC from agricultural watersheds. Calculated anthropogenic loading rates ranged from 0.43 to 0.86 mol C m^− 2 yr^− 1. These loading rates suggest that a significant portion of global DIC export might be attributable to human activities, although the impacts on CO₂ sequestration are difficult to determine.  相似文献   

Effect of alpha-damage annealing on apatite (U–Th)/He thermochronology     

Ccile Gautheron  Laurent Tassan-Got  Jocelyn Barbarand  Maurice Pagel 《Chemical Geology》2009,266(3-4):157-170

Recent data on He diffusion challenge the temperature sensitivity of apatite (U–Th)/He thermochronology: the damage induced by recoil of U and Th decay series during emission of α particles (α-recoil damage) has been proposed to modify He-diffusion properties through time. However, we propose that annealing of these irradiation defects may be an important phenomenon and may be significant in case of slowly-cooled or reheated basement rocks. To test this hypothesis, we developed a quantitative model including an explicit treatment of α-recoil damage, annealing, and their effect on He-diffusion kinetics, and calibrate it against literature data. Our model is based on two hypotheses: (1) helium is in equilibrium between an apatite crystal and its defects and (2) alpha-recoil damage annealing can be described analogously to fission-track annealing. This model has been embedded into a Monte Carlo simulation of helium production/ejection/diffusion and applied to data from the French Massif Central; a complex slowly-cooled terrain with burial reheating, where the thermal history has been constrained by previous fission-track (FT) data including FT length distributions. (U–Th)/He ages are close to the FT ages from the same samples and are generally reproducible among replicates, but some samples present He-age dispersion that is not correlated with crystal size. Our model reproduces the Massif Central data very well except for three samples where He ages are older than corresponding FT ages. We show that annealing of irradiation damage has an important impact on retentivity of helium and that the He content, [He] is only a rough approximation of the damage level. In particular our results show that independence of He ages on crystal sizes, in case of reheated samples, is a clear indication of the higher He retentivity induced by α-recoil defects and that an explicit treatment of defect annealing is required for a correct interpretation of (U–Th)/He ages in such a case. More generally a correlation with the crystal size can bring information on the thermal path only if the age of defects, well represented by the fission-track age, is available, due to the dependence of the partial retention zone on damages. Conversely, in case of rapid cooling or for samples having low U and Th contents, damage effects can be ignored without significant effects on He ages.  相似文献   

Pile foundation analysis and design using experimental data and 3-D numerical analysis   总被引：1，自引：0，他引：1  

Emilios M. Comodromos  Mello C. Papadopoulou  Ioannis K. Rentzeperis 《Computers and Geotechnics》2009

Capacity based design of pile foundations limits the soil-structure interaction mechanism to group bearing capacity estimation, neglecting, in most cases, the contribution of the raft. On the other hand, a straightforward, nonlinear, 3-D analysis, accounting for soil and structural nonlinearities and the effects arising from pile–soil–pile interaction, would be extremely high CPU-time demanding and will necessitate the use of exceptionally powerful numerical tools. With the aim of investigating the most efficient, precise, and economical design for a bridge foundation, a hybrid method, compatible with the notion of sub-structuring is proposed. It is based on both experimental data and nonlinear 3-D analysis. The first step to achieve these targets is a back-analysis of a static pile load test, fitting values for soil shear strength, deformation modulus, and shear strength mobilization at the soil–pile interface. Subsequently, the response of 2 × 2 and 3 × 3 pile group configurations is numerically established and the distribution of the applied load to the raft and the characteristic piles is discussed. Finally, a design strategy for an optimized design of pile raft foundations subjected to non-uniform vertical loading is proposed.  相似文献   

Breakdown of hydrous ringwoodite to pyroxene and spinelloid at high P and T and oxidizing conditions     

M. Koch-Müller  D. Rhede  R. Schulz  R. Wirth 《Physics and Chemistry of Minerals》2009,36(6):329-341

To get deeper insight into the phase relations in the end-member system Fe₂SiO₄ and in the system (Fe, Mg)₂SiO₄ experiments were performed in a multi-anvil apparatus at 7 and 13 GPa and 1,000–1,200°C as a function of oxygen fugacity. The oxygen fugacity was varied using the solid oxygen buffer systems Fe/FeO, quartz–fayalite–magnetite, MtW and Ni/NiO. The run products were characterized by electron microprobe, Raman- and FTIR-spectroscopy, X-ray powder diffraction and transmission electron microscopy. At fO₂ corresponding to Ni/NiO Fe-ringwoodite transforms to ferrosilite and spinelloid according to the reaction: 9 Fe₂SiO₄ + O₂ = 6 FeSiO₃ + 5 Fe_2.40Si_0.60O₄. Refinement of site occupancies in combination with stoichiometric Fe³⁺ calculations show that 32% of the total Fe is incorporated as Fe³⁺ according to From the Rietveld refinement we identified spl as spinelloid III (isostructural with wadsleyite) and/or spinelloid V. As we used water in excess in the experiments the run products were also analyzed for structural water incorporation. Adding Mg to the system increases the stability field of ringwoodite to higher oxygen fugacity and the spinel structure seems to accept higher Fe³⁺ but also water concentrations that may be linked. At oxygen fugacity corresponding to MtW conditions similar phase relations in respect to the breakdown reaction in the Fe-end-member system were observed but with a strong fractionation of Fe into spl and Mg into coexisting cpx. Thus, through this strong fractionation it is possible to stabilize very Fe-rich wadsleyite with considerable Fe³⁺ concentrations even at an intermediate Fe–Mg bulk composition: assuming constant K _D independent on composition and a bulk composition of x _Fe = 0.44 this fractionation would stabilize spl with x _Fe = 0.72. Thus, spl could be a potential Fe³⁺ bearing phase at P–T conditions of the transition zone but because of the oxidizing conditions and the Fe-rich bulk composition needed one would expect it more in subduction zone environments than in the transition zone in senso stricto.

M. Koch-MüllerEmail:

  相似文献   

Peierls dislocation modelling in perovskite (CaTiO<Subscript>3</Subscript>): comparison with tausonite (SrTiO<Subscript>3</Subscript>) and MgSiO<Subscript>3</Subscript> perovskite     

Denise Ferré  Philippe Carrez  Patrick Cordier 《Physics and Chemistry of Minerals》2009,36(4):233-239

We present here a numerical modelling study of dislocations in perovskite CaTiO₃. The dislocation core structures and properties are calculated through the Peierls–Nabarro model using the generalized stacking fault (GSF) results as a starting model. The GSF are determined from first-principles calculations using the VASP code. The dislocation properties such as collinear, planar core spreading and Peierls stresses are determined for the following slip systems: [100](010), [100](001), [010](100), [010](001), [001](100), [001](010), and All dislocations exhibit lattice friction, but glide appears to be easier for [100](010) and [010](100). [001](010) and [001](100) exhibit collinear dissociation. Comparing Peierls stresses among tausonite (SrTiO₃), perovskite (CaTiO₃) and MgSiO₃ perovskite demonstrates the strong influence of orthorhombic distortions on lattice friction. However, and despite some quantitative differences, CaTiO₃ appears to be a satisfactory analogue material for MgSiO₃ perovskite as far as dislocation glide is concerned.  相似文献   

FY-3C/VIRR中红外图像太阳光污染订正     

朱吉彪  胡秀清  杨磊库  徐寒列  徐娜  张鹏 《遥感学报》2021,25(3):803-815

风云三号C星(FY-3C)上搭载的可见光红外扫描辐射计VIRR (Visible and Infra-Red Radiometer)是继承风云一号卫星光学成像仪器,它在高纬度昼夜交替区域附近由于地平线附近太阳光照射,导致仪器扫描镜和其他部件产生杂散光,导致对地观测图像被污染,尤其VIRR中红外第3通道(3.7μm)图像产生了严重条带噪声,影响了后续产品的质量精度和数据应用。本文根据图像条带噪声各向异性的特点,利用单向变分条带去除模型,对VIRR第3通道图像进行条带噪声去除研究,采用噪声去除前后图像行均值曲线与定量评价指标辐射质量改进因子IF (Improvement Factors of Radiometric Quality)和逆变异系数ICV (Inverse Coefficient of Variation)等进行去除结果评价。结果表明,单向变分模型对FY-3C VIRR第3通道观测数据太阳污染条带噪声具有较好的订正效果,实验中,PSNR提升到32.77 dB;在真实数据实验中,IF提升到16.99 dB。  相似文献